Specifications

2-20
Linksys ATA Administrator Guide
Document Version 3.1
Chapter 2 Getting Started
Using the Interactive Voice Response Interface
Set Network Mask 121 Enter value using numbers
on the telephone key pad.
Use the * (star) key when
entering a decimal point.
DHCP must be “Disabled,” otherwise
you hear, “Invalid Option,” if you try to
set this value.
Requires password
Check Static Gateway IP
Address
130 None IVR announces the current gateway IP
address of the Linksys ATA.
Set Static Gateway IP
Address
131 Enter IP address using
numbers on the telephone
key pad. Use the * (star) key
when entering a decimal
point.
DHCP must be “Disable,” otherwise you
hear, “Invalid Option,” if you try to set
this value.
Requires password
Check MAC Address 140 None IVR announces the MAC address of
Linksys ATA in hex string format.
Check Firmware Version 150 None IVR announces the version of the
firmware running on the Linksys ATA.
Check Primary DNS
Server Setting
160 None IVR announces the current setting in the
<Primary DNS> parameter.
Set Primary DNS Server 161 Enter IP address using
numbers on the telephone
key pad. Use the * (star) key
when entering a decimal
point.
Requires password
Check administration
web server port
170 None IVR announces the port that the web
server is listening on. (Default is 80)
Check LAN IP Address 210 None IVR announces the current IP address of
the LAN port.
Check PBX multicast
address
180 None IVR announces the current value.
Set PBX multicast
address
181 Enter IP address and port.
Use * key for entering a dot.
For example,
224.168.168.169:8089 is
224*168*168*169*8089.
Enter a * between the IP address and the
Port fields. Requires Password
Enable/Disable
administration web
server
7932 Enter 1 to enable
Enter 0 to disable
Requires password
Manual Reboot of Unit 732668 None After you hear “Option Successful,”
hang up. Unit reboots automatically.
Table 1-25 IVR Options (continued)