Specifications

2-12
Linksys ATA Administrator Guide
Document Version 3.1
Chapter 2 Getting Started
Linksys Analog Telephone Adapters (ATAs)
Figure 1-12 WRTP54G
The following tables describe the LEDS on the front panel and the ports on the back panel of the device
Table 1-20 WRTP54G Front Panel
LED Function
Ethernet 1-4 Steady green indicates an active connection to the network. Flashing
indicates traffic.
Wireless Steady green indicates an active connection to the network. Flashing
indicates traffic.
Phone 1/2 Steady green when telephone or fax machine has an active or registered
connection to the ITSP through the Phone port. Flashing indicates phone is
in use or off hook.
Internet Steady green indicates active connection. Flashing indicates traffic.
Table 1-21 WRTP54G Back Panel
Port Function
Internet Connect to the broadband (cable/DSL) modem using an Ethernet cable.
Phone 1/2 Connect to an analog telephone or fax machine using an RJ-11 cable.
Ethernet 1-4 Connect to local IP devices, such as PCs, using an Ethernet cable.
Power Connect to the 12-volt power supply.