Specifications

2-6
Linksys ATA Administrator Guide
Document Version 3.1
Chapter 2 Getting Started
Linksys Analog Telephone Adapters (ATAs)
Figure 1-7 SPA1001
The following table describes the LEDS and ports on the back panel of the device.
SPA2102
The SPA2102 provides two FXS ports and an Ethernet port for connecting to a local PC or other Ethernet
device.
Table 1-11 SPA1001 Back Panel
LED/Port Function
Phone Connect to an analog telephone or fax machine with an RJ-11 cable.
Power Connect to the 5-volt DC power adapter.
Act Steady green indicates active or registered connection to the ITSP through
the Phone port. Flashing indicates device is in use or off hook.
Steady yellow indicates active Ethernet connection. Flashing indicates
traffic.
Ethernet Connect to a router or broadband (cable/DSL) modem.