Specifications
2-4
Linksys ATA Administrator Guide
Document Version 3.1
Chapter 2 Getting Started
Linksys Analog Telephone Adapters (ATAs)
Figure 1-5 PAP2T
The following tables describe the LEDS on the front panel and the ports on the back panel of the device.
RTP300
The RTP300 provides an ATA with two FXS ports along with an IP router (see Figure 1-6). The RTP300
provides connectivity to an analog telephone as well as Internet connectivity to a LAN with a built-in
four-port switch. The IP router provides QoS support, an integrated firewall and VPN pass-through, and
full routing with DHCP and NAT.
Table 1-7 PAP2T Front Panel
LED Function
Phone 1/2 Steady green indicates active or registered connection to the ITSP through
the Phone port. Flashing indicates device is in use or off hook.
Ethernet Steady green indicates active connection. Flashing indicates traffic.
Power Steady green indicates power on and Internet connection. Flashing indicates
not connected to the Internet, booting or firmware upgrade.
Table 1-8 PAP2T Back Panel
Port Function
Phone 1/2 Connect to an analog telephone or fax machine with an RJ-11 cable.
Ethernet Connect to a router or broadband (cable/DSL) modem.
Power Connect to the 5-volt DC power adapter.