Specifications

2-3
Linksys ATA Administrator Guide
Document Version 3.1
Chapter 2 Getting Started
Linksys Analog Telephone Adapters (ATAs)
PAP2T
The PAP2T provides two FXS ports (see Figure 1-5).
Table 1-5 AG310 Front Panel
LED Function
Power Steady green indicates power on and Internet connection. Flashing indicates
not connected to the Internet, booting or firmware upgrade.
Ethernet 1-4 Steady green indicates an active connection to the network. Flashing
indicates traffic.
Voice Status Steady green indicates that a voice call is currently in progress.
Phone Steady green indicates active or registered connection to the ITSP through
the Phone port. Flashing indicates device is in use or off hook.
Line Steady green when a telephone or fax machine has an active connection to
traditional phone service through the Line port.
DSL Steady green indicates that the DSL connection is active.
Internet Steady green indicates active connection. Flashing indicates traffic.
Table 1-6 AG310 Back Panel
Port Function
DSL Connect to the telephone wall jack providing DSL service using a RJ-11
cable.
Line Connect to a standard telephone wall jack with an RJ-11cable.
Phone Connect to an analog telephone or fax machine with an RJ-11 cable.
Ethernet 1-4 Connect to network devices, such as a PC or a switch, using an Ethernet
cable.
Power Connect to the power supply.