Specifications

C-11
Linksys ATA Administrator Guide
Document Version 3.01
Appendix C User Guidelines
Enhanced Services
Call FWD—No Answer
Anonymous Call Blocking
Service description Calls are forwarded to the designated forwarding number after a
configurable time period elapses while the SPA is ringing and does not
answer.
User action required to
activate or use
1. Lift the receiver
2. Listen for dial tone
3. Press *92Listen for dial tone and enter the telephone number you are
forwarding your call to.
Activation is confirmed with three short bursts of tone and your forwarding
is activated.
Alternatively, the user can activate this feature from a web browser
interface.
Note The forward delay is entered from the web interface. Default is 20s.
Expected call and
network behavior
This feature allows a user the option to divert (forward) calls to their
telephone number to any other dialable number when their phone is not
answered by using the touchtone keypad of their telephone or web browser
interface. This service is activated or deactivated from the phone being
forwarded or the web browser interface.
User action required to
deactivate or end
1. Lift the receiver
2. Listen for dial tone
3. Press *93
You will hear a confirmation tone signaling your change has been accepted.
Alternatively, the user can deactivate this feature from a web browser
interface.
Service description By setting the corresponding configuration parameter on the SPA, the
subscriber has the option to block incoming calls that do not reveal the Caller
ID of the caller.
User action required to
activate or use
1. Pick up the receiver
2. Listen for dial tone
3. To activate, press *77
Expected call and
network behavior
When activated by the user, callers hear a busy tone.
User action required to
deactivate or end
To de-activate, press *87