Specifications

C-5
Linksys ATA Administrator Guide
Document Version 3.01
Appendix C User Guidelines
Enhanced Services
Call-Waiting with Caller ID
Voice Mail
Service description When the user is on the phone and has Call Waiting active, the new caller
Caller ID information is displayed on the user phone display screen at the
same time the user is hearing the Call Waiting beeps/tones.
User action required to
activate or use
The telephone equipment connected to the SPA must support Call-Waiting
with Caller ID.
Expected call and
network behavior
In between call waiting tone bursts, the SPA can generate a Caller-ID signal
to the attached phone when it is off hook.
User action required to
deactivate or end
Not applicable.
Service description Service providers may provide voice mail service to their subscribers. Users
have the ability to retrieve voice mail via the telephone connected to the
SPA.
User action required to
activate or use
The SPA indicates that a message is waiting by playing stuttered dial tone
when the user picks up the handset.
To retrieve messages:
1. Lift the receiver
2. Listen for dial tone
3. Dial the phone number assigned to the SPA
You will be connected to the voice mail server and prompted by a voice
response system with instructions to listen to your messages.
Expected call and
network behavior
When voice mail is available for a subscriber, a notification message is sent
from the voice mail server to the SPA. When the user dials their own phone
number, the SPA connects the subscriber to their voice mail system, which
can then connect them to their individual voice mail box.
User action required to
deactivate or end
Follow instructions of the voice mail system or simply hang up the
telephone.