Specifications

5-70

Linksys IP Phone Administrator Guide

Document Version 3.2

Chapter 5 Linksys ATA Field Reference

PSTN User Tab (SPA3102/AG310)

This section describes the fields for the following headings on the PSTN User tab on the SPA3102:

• PSTN-To-VoIP Selective Call Forward Settings, page 5-70

• PSTN-To-VoIP Speed Dial Settings, page 5-70

• PSTN Ring Thru Line 1 Distinctive Ring Settings, page 5-70

• PSTN Ring Thru Line 1 Ring Settings, page 5-71

• PSTN/VoIP Caller Commands via DTMF, page 5-71

Note References in this section to the SPA3102 also apply to the AG310.

PSTN-To-VoIP Selective Call Forward Settings

PSTN-To-VoIP Speed Dial Settings

PSTN Ring Thru Line 1 Distinctive Ring Settings

Field Description

Cfwd Sel1 Caller First of eight PSTN Caller Number Patterns to be blocked for VoIP gateway services or

forwarded to a certain VoIP number. If the caller is blocked, the SPA will not auto-answers

the call.

Cfwd Sel1 Dest VoIP destination to forward a PSTN caller matching <Cfwd Sel1 Caller>. If this entry is

blank, the PSTN caller is blocked for VoIP service.

Block Last Caller ID of caller blocked via the Block Last Caller service

Accept Last Caller ID of caller accepted via the Accept Last Caller service

Field Description

Speed Dial 2/3/4/5/6/7/8/9 The VoIP number to call when the PSTN caller dials a single digit ‘2’

Field Description

Ring1/2/3/4/5/6/7/8 Caller First of 8 PSTN Caller Number Patterns such that the corresponding ring will be used to

ring through Line 1 if the PSTN caller matches this pattern.