Specifications

5-54
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5 Linksys ATA Field Reference
PSTN Line Tab
Subscriber Information (SPA3102/AG310)
Proxy Fallback Intvl This parameter sets the delay (sec) after which the PAP2T will retry from the highest
priority proxy (or outbound proxy) servers after it has failed over to a lower priority
server. This parameter is useful only if the primary and backup proxy server list is
provided to the PAP2T via DNS SRV record lookup on the server name. (Using multiple
DNS A record per server name does not allow the notion of priority and so all hosts will
be considered at the same priority and the PAP2T will not attempt to fall back after a fail
over).
The default is 3600
Proxy Redundancy Method PAP2T will make an internal list of proxies returned in DNS SRV records. In normal mode
this list will contain proxies ranked by weight and priority.
if Based on SRV port is configured the PAP2T does normal first, and also inspect the port
number based on 1
st
proxy’s port on the list.
The default is Normal.
Field Description
Field Description
Display Name Display name for caller ID.
User ID Extension number for this line.
Password Password for this line.
Use Auth ID To use the authentication ID and password for SIP authentication, select yes. Otherwise,
select no to use the user ID and password.
The default is no.
Auth ID Authentication ID for SIP authentication.
Call Capacity Maximum number of calls allowed on this line interface. Choices: {unlimited,1,2,3,…25
}. Default is 16. Note that the Linksys IP phone does not distinguish between incoming
and outgoing calls when talking about call capacity. Note: unlimited = 16
Mini Certificate Base64 encoded of Mini-Certificate concatenated with the 1024-bit public key of the CA
signing the MC of all subscribers in the group.
The default is empty.
SRTP Private Key Base64 encoded of the 512-bit private key per subscriber for establishment of a secure
call.
The default is empty.