User guide

Installing Your Phone
Connecting the Handset
Cisco Small Business IP Phone SPA 525G/SPA 525G2 (SPCP) User Guide 21
2
Connecting the Handset
STEP 1 Find the longer end of the coiled phone cord. Insert it into the back of the phone
base in the slot marked with a phone symbol. This port is labeled #6 on the Cisco
SPA 525G/525G2 IP Phone Connections graphic.
STEP 2 Insert the short end of the handset cord into the jack at the bottom of the handset
(not shown).
Figure 2 Cisco SPA 525G/525G2 IP Phone Connections