User guide

Getting Started

Using Phone Hardware and Accessories

Cisco Small Business IP Phone SPA 525G/SPA 525G2 (SPCP) User Guide 17

STEP 3 In the list of found devices, select your headset and press the Select button to edit

the profile.

STEP 4 Scroll to PIN and enter the PIN for your Bluetooth headset.

STEP 5 Scroll to Connect Automatically and press the Right Arrow key to turn to

STEP 6 Press Connect. The profile screen displays and a check mark appears next to the

headset if the connection was successful.

After enabling Bluetooth, create a profile for your headset:

STEP 1 Enable Bluetooth as described above.

STEP 2 Press the Setup button.

STEP 3 Scroll to User Preferences and press Select.

STEP 4 Scroll to Bluetooth Configuration and press Select.

STEP 5 Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the

following:

• Phone—Your Cisco SPA 525G2 will pair with a Bluetooth headset only.

Choose this option if you will not use the Cisco SPA 525G2 with a Bluetooth-

enabled mobile phone.