User guide

Using the Phone Web User Interface
Setting Voice Regional Parameters
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide 52
5
Confirm Tone Brief tone to notify the user that the last input
value has been accepted.
Defaults to 600@-16; 1(.25/.25/1).
SIT1 Tone Alternative to the Reorder Tone played when an
error occurs as a caller makes an outbound call.
The RSC to trigger this tone is configurable on the
SIP
IP phone screen. Defaults to
985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/
2,.380/0/3,0/4/0).
SIT2 Tone Alternative to the Reorder Tone played when an
error occurs as a caller makes an outbound call.
The RSC to trigger this tone is configurable on the
SIP
IP phone screen.
Defaults to 914@-16,1371@-16,1777@-16;20(.274/
0/1,.274/0/2,.380/0/3,0/4/0).
SIT3 Tone Alternative to the Reorder Tone played when an
error occurs as a caller makes an outbound call.
The RSC to trigger this tone is configurable on the
SIP
IP phone screen.
Defaults to 914@-16,1371@-16,1777@-16;20(.380/
0/1,.380/0/2,.380/0/3,0/4/0)
SIT4 Tone This is an alternative to the Reorder Tone played
when an error occurs as a caller makes an
outbound call. The RSC to trigger this tone is
configurable on the SIP
IP phone screen.
Defaults to 985@-16,1371@-16,1777@-16;20(.380/
0/1,.274/0/2,.380/0/3,0/4/0).
MWI Dial Tone Played instead of the Dial Tone when there are
unheard messages in the caller’s mailbox.
Defaults to 350@-19,440@-19;2(.1/.1/1+2);10(*/0/
1+2).
Cfwd Dial Tone Played when all calls are forwarded.
Defaults to 350@-19,440@-19;2(.2/.2/1+2);10(*/0/
1+2).
Parameter Description