User guide

Using the Phone Web User Interface
Logging in to the Phone Web User Interface
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide 45
5
Logging in to the Phone Web User Interface
To log into the phone web user interface:
STEP 1 Get the IP address of your phone:
Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, Cisco SPA509G,
Cisco SPA514G:
a. Press the Setup button.
b. Scroll to Settings > Network Configuration.
c. Scroll to view IP Address. This is the IP address of your phone.
Cisco SPA501G:
a. Press the Setup button.
b. Enter 110, then press #. The IP address is recited.
STEP 2 On your PC, open a Web browser. Your PC must be on the same subnetwork as
the phone.
STEP 3 Enter the IP address in the browser address bar. The phone web user interface
displays.
The phone web user interface has two main options:
• Voice—Contains information about your phone, including the following sub-
tabs:
- Info—System, reboot history, product, status, extension, and line
information (read only).
- System—Password and network settings.
- Regional—Ring cadence.
- Phone—Ring tones
- User—Call forwarding, speed dials, call waiting, privacy settings, and
audio settings.
- Ext 1—Time of Service (ToS) and Cost of Service (CoS).
• Call History—Calls placed, received, and missed on your phone.