User guide

Using Advanced Phone Features
Monitoring/Accessing Another Phone from Your Phone
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide 38
4
NOTE If you have configured an unused line button with a speed dial number, press the
button to dial.
Cisco SPA501G:
To call one of your configured speed dial numbers, press the number for the
speed dial and wait a few seconds.
Monitoring/Accessing Another Phone from Your Phone
Your system administrator can configure your phone so that you can monitor other
phones on the network from your phone if the feature is available on your system.
If this feature is configured, some line buttons on your phone are assigned to
display the status of another user phone. For example, if your line 4 is configured to
display Bob’s phone line, the button color shows you the status of that phone line:
In addition, if your system administrator has configured it, you can press the same
line button (4) to speed dial Bob’s extension, or to pick up a ringing call at his
extension.
NOTE Not applicable to the Cisco SPA502G or Cisco SPA512G.
Customizing Your IP Phone Screen
NOTE Not available on the Cisco SPA501G.
You can customize your IP phone screen in several ways.
Changing the IP Phone Screen Contrast
To adjust the contrast of the IP phone screen:
STEP 1 Press the Setup button.
STEP 2 Scroll to Settings and press Select.
STEP 3 Scroll to Screen Contrast and press Select.