System information

Customizing Standard Features

Configuring Bluetooth (Cisco SPA525G or Cisco SPA525G2 only)

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 81

Pairing Your Cisco SPA525G2 with a Bluetooth-Enabled

Mobile Phone

This feature is based on the following standard Bluetooth profiles:

• Phone Book Access Profile 1.0

• Handsfree Profile 1.5

• Handset Profile 1.1

Make sure your mobile phone provides support for one of the above profiles.

Cisco provides a reference list of Bluetooth-enabled mobile phones supported

with the Cisco SPA525G2. See the Cisco support community at

http://www.cisco.com/go/smallbizsupport and consult the latest

Cisco SPA525G2 release notes, available at cisco.com.

For more detailed instructions, see the

Cisco Small Business Cisco SPA525G or

Cisco SPA525G2 IP Phone User Guides

To pair your Cisco SPA525G2 with your Bluetooth-enabled mobile phone, you can

either initiate pairing from the Cisco SPA525G2, or from your mobile phone.

Initiating Pairing from the Cisco SPA525G2

STEP 1 Enable Bluetooth as described in Enabling Bluetooth from the Web Interface.

STEP 2 Press the Setup button.

STEP 3 Scroll to User Preferences and press Select.

STEP 4 Scroll to Bluetooth Configuration and press Select.

STEP 5 Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the

following:

• Handsfree—Your Cisco SPA525G2 operates as a handsfree device with a

Bluetooth-enabled mobile phone.

• Both—Your Cisco SPA525G2 operates with your Bluetooth-enabled mobile

phone or operate with a Bluetooth headset. The Cisco SPA525G2 connects

to only one device at a time (either the Bluetooth headset or the Bluetooth-

enabled mobile phone.)

If multiple Bluetooth devices are in range of the Cisco SPA525G2, the order

of devices in the Bluetooth Configuration > Bluetooth Profiles list is used,

and the device with a higher priority is activated first.