System information

Customizing Standard Features

Enabling Wireless (Cisco SPA525G or Cisco SPA525G2 only)

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 78

• Set a value that is loud enough to hear clearly without producing echo (an

indication that the input gain is too high).

Enabling Wireless (Cisco SPA525G or Cisco SPA525G2 only)

The Cisco SPA525G or Cisco SPA525G2 provides a Wireless-G interface. If a

wired link is connected to the phone, the wireless connection is automatically

disabled.

To enable wireless communications, navigate to Admin Login > advanced > Voice

> System. Under Wi-Fi Settings, in the SPA525-wifi-on field, choose yes to enable

or no to disable.

Configuring Bluetooth (Cisco SPA525G or Cisco SPA525G2

only)

The Cisco SPA525G or Cisco SPA525G2 supports Bluetooth to allow use of the

phone with a wireless Bluetooth-enabled headset. The Cisco SPA525G2 also

supports Bluetooth communications with a Bluetooth-enabled mobile phone. You

can do the following:

• Pair your Bluetooth-enabled mobile phone and Cisco SPA525G2. Your

mobile phone is assigned a line button on your Cisco SPA525G2. You can

make and receive mobile network calls by using the Cisco SPA525G2.

• Switch audio for in-progress calls between your mobile phone and the

Cisco SPA525G2.

• Import your mobile phone address book to your Cisco SPA525G2 personal

address book.

• Use your Cisco SPA525G2 as a handsfree device for your mobile phone.

For a list of supported Bluetooth headsets, see https://supportforums.cisco.com/

docs/DOC-9926.