System information

Cisco SPA IP Phone Field Reference
Attendant Console Status
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 323
A
Attendant Key LED Patterns
Attendant Console Status
This page provides two tabs to display the status of up to two Cisco Attendant
Consoles that are supported by a single IP phone:
• Unit 1—Displays information about the first Cisco Attendant Console.
• Unit 2—Displays information about the second Cisco Attendant Console.
Each tab provides the read-only fields described in the following table:
Parameter Description
Parking Lot Idle LED These parameters are used to define the LED
pattern when the extension is in the parked state.
By default, when there is a call parked on the
monitored line (parking lot busy), the phone line
LED is in a very slow red blinking state (150ms on,
150ms off). When there is no call parked on the
monitored line (parking lot idle), the phone line
LED will be in off (or line idle) state. If the button is
the primary line, shared line or BLF line, the button
LED will reflect the current button status and not
reflect the Parking Lot Idle status if the parking lot
is idle. If the button is a call park button, the button
will reflect the Parking Lot Idle or Parking Lot
Busy statuses.
To define a pattern other than the default (slow
red blinking), enter a pattern in these fields. See
Chapter 9, “Configuring LED Patterns.”
Parking Lot Busy LED