System information

Cisco SPA IP Phone Field Reference
Attendant Console Tab (Cisco SPA500 Series)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 322
A
Test Mode Enable Enables or disables test mode. When test mode is
enabled, the LEDs are turned on when keys are
pressed, going from off to green to red, and back
to off. In test mode, when all the buttons on the
Cisco Attendant Console are returned to off, all
the keys become orange. The IP phone must be
rebooted after the test is completed.
Attendant Console Call
Pickup Code
The star code used for picking up a ringing call.
Defaults to *98.
Attendant Console Call
Park Code
The star code used for parking a call. Defaults to
*68.
Attendant Console Call
unPark Code
The star code used for retrieving a parked call.
Defaults to *88.
BLF List URI Automatically configures Busy Lamp Field (BLF)
subscriptions for all users on a monitored list.
Call Pickup Audio
Notification
By default, this parameter is set to no. If you set it
to yes, the phone plays the Call Pickup tone when
there are incoming calls to any of the lines that the
user is monitoring with the Call Pickup function.
Use the following in your configuration file:
<Call_Pickup_Audio_Notification ua="na">Yes
</Call_Pickup_Audio_Notification>
Attendant Console LCD
Contrast (SPA500DS)
The contrast between the text, lines, and
background on the attendant console display.
Enter a number value from 1 to 30. The higher the
number, the greater the contrast on the display.
Attendant Console Font
Size (SPA500DS)
Font size of the text on the attendant console
display. Choose 10 or 12 point font.
Unit 1/2 Key 1-32
(SPA500S)
Unit 1/2 Key 1-30
(SPA500DS)
Enter a strings that define the extension and other
parameters associated with each lighted button
on the first Cisco Attendant Console. Keywords
and values are case-sensitive.
Parameter Description