System information

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 285
A
In addition to these two ring tones, four user-configurable ring tones were added:
These four ring tones must be provisioned or configured by using the phone web
user interface.
Ring Tone (Cisco WIP310)
Label Value of the w Parameter
Warble (Cisco SPA300 Series and Cisco SPA500 Series)
w=7
((Cisco SPA525G or Cisco SPA525G2))
w=file://Warble.raw
Low (Cisco SPA300 Series and Cisco SPA500 Series)
w=8
((Cisco SPA525G or Cisco SPA525G2))
w=file://Low.raw
Floor (Cisco SPA300 Series and Cisco SPA500 Series)
w=9
((Cisco SPA525G or Cisco SPA525G2))
w=file://Floor.raw
Reverb (Cisco SPA300 Series and Cisco SPA500 Series)
w=10
((Cisco SPA525G or Cisco SPA525G2))
w=file://Reverb.raw
Parameter Description
Keypad Tone Select yes to enable the keypad tone to be
played when a key on the keypad is pressed.
Select no to silence the keypad.
Keypad Tone Volume Corresponds to the volume of the keypad tone.
Default is 5.