Datasheet

Data Sheet
All contents are Copyright © 1992–2007, 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 7
Feature Description
Compliance and agency
approvals
Safety
UL 60950-1
CSA C22 No. 60950-1
EN 60950-1
IEC 60950-1
AS/NZS 60950
EN 60825-1
EN 60825-2
21 CRF 1040
EMC
CFR 47, FCC Part 15-Class A
ICES 003-Class A
CISPR 22 Class A
EN 55022 Class A
EN 300386 Class A
AS/NZS Class A
VCCI-Class B
EN 50082-1
EN 55024
IEC/EN61000-4-2 Electrostatic Discharge Immunity (8-kV contact, 15-kV air)
IEC/EN61000-4-3 Radiated Immunity (10 V/m)
IEC/EN61000-4-4 Electrical Fast Transient Immunity (2-kV power, 1-kV signal)
IEC/EN61000-4-5 Surge AC Port (4-kV CM, 2-kV DM)
IEC/EN61000-4-5 Surge Signal Port (1-kV indoor, 2-kV outdoor)
IEC/EN61000-4-5 Surge DC Port (1 kV)
IEC/EN61000-4-6 Immunity to Conducted Disturbances (10 Vrms)
IEC/EN61000-4-8 Power Frequency Magnetic Field Immunity (30 A/m)
IEC/EN61000-4-11 Voltage Dips, Short Interruptions, and Voltage Variations
Telecom
IEEE 802.3ae (10 Gigabit Ethernet interface SPA)
Industry Standards
The Cisco 1-Port 10-GE LAN/WAN-PHY SPA is designed to meet the following requirements
(some qualifications are currently in progress):
SR-3580-Network Equipment Building Standards (NEBS): Criteria levels (Level 3 compliant)
GR-63-CORE-NEBS: Physical protection
GR-1089-CORE-NEBS EMC and safety
Table 2. Optical Specifications: Modular
Gigabit Ethernet XFP Optics Maximum Distance
10 GE long-reach (LR) optics (single-mode fiber) 6.2 miles (10 km)
10 GE extended-reach (ER) optics (single-mode fiber) 25 miles (40 km)
10 GE long-haul (ZR) optics (single-mode fiber) 50 miles (80 km)
Table 3. SONET/SDH Feature Support on 10 Gigabit Ethernet WAN Interface
SONET/SDH Features and Functions Ethernet WAN Interface Comments
Jitter Compliance Not supported Ethernet WAN interface cannot be used in
SONET/SDH rings
Synchronization (Loop Timing Mode, High
Accuracy PRS)
Not supported Ethernet WAN interface cannot be used in
SONET/SDH rings
Automatic Protection Switching Not supported Equivalent link redundancy functionality in
Ethernet is 802.1ad link (LAG)
Section and Line DCC (Data Channel
Communication)
Not supported These user communication channels cannot be
used in Ethernet
Section, Line, Path Order wire (64 kbps
channel)
Not supported
Section, Line, Path Growth Not supported