System information

Managing Device Diagnostics
Te s t i n g C o p p e r P o r t s
Cisco Small Business 200 Series Smart Switch Administration Guide 87
9
• Speed—Link speed.
• Link Status—Current link Up/Down status.
• Pair—Cable wire pairs being tested.
• Distance to Fault—Distance between the port and the location on the cable
where the fault was discovered.
• Status—Wire pair status. Red indicates fault and Green indicates status OK.
• Cable length—Cable length in meters.
If the link is down, TDR Technology is used to test the GE and FE ports. Cable
length measurements are accurate to within 3 to 4 meters.
If the link is up, DSP Technology is used to test the GE ports. (FE ports are not
tested for length.).
• Channel—Cable channel.
• Polarity—Indicates if automatic polarity detection and correction has been
activated for the wire pair.
• Pair Skew—Difference in delay between wire pairs.
STEP 5 Click Close to close the window.