System information

Viewing Statistics
Viewing Etherlike Statistics
Cisco Small Business 200 Series Smart Switch Administration Guide 11
2
• Interface—Select the type of interface and specific interface for which
Ethernet statistics are to be displayed.
• Refresh Rate—Select the amount of time that passes before the Etherlike
statistics are refreshed.
The fields are displayed for the selected interface.
• Frame Check Sequence (FCS) Errors—Received frames that failed the
CRC (cyclic redundancy checks).
• Single Collision Frames—The number of frames involved in a single
collision, but were successfully transmitted.
• Late Collisions—Collisions that have been detected after the first 512 bits
of data.
• Excessive Collisions—Number of transmissions due to excessive collisions.
• Oversize Packets—Packets greater than 1518 octets received.
• Internal MAC Receive Errors—Frames rejected because of receiver errors.
• Received Pause Frames—Received flow control pause frames.
• Transmitted Pause Frames—Flow control pause frames transmitted from
the selected interface.
To clear statistics counters:
• Click Clear Interface Counters to clear the selected interface’s Etherlike
statistics counters.
• Click Clear All Interface Counters to clear the Etherlike statistics counters
of all interfaces.