System information

Configuring IP Information
Domain Name Systems
Cisco Small Business 200 Series Smart Switch Administration Guide 158
15
• IP Address—The IP address of the IP device.
• MAC Address—The MAC address of the IP device.
• Status—Whether the entry was manually entered or dynamically learned.
STEP 3 Click Apply. The ARP global settings are modified, and the switch is updated.
STEP 4 Click Add. The Add ARP Page (Layer 2) opens.
STEP 5 Enter the parameters.
• IP Version—The IP address format supported by the host. Only IPv4 is
supported.
• Interface—IPv4 interface on the switch.
There is only one directly connected IP subnet, which is always in the
management VLAN. All the static and dynamic addresses in the ARP Table reside
in the management VLAN.
• IP Address—Enter the IP address of the local device.
• MAC Address—Enter the MAC address of the local device.
STEP 6 Click Apply. The ARP entry is defined, and the switch is updated.
Domain Name Systems
The Domain Name System (DNS) translates user-defined domain names into
IP addresses for the purpose of locating and addressing these objects.
As a DNS client the switch resolves domain names to IP addresses through one or
more configured DNS servers.