System information

Configuring IP Information
Management and IP Interfaces
Cisco Small Business 200 Series Smart Switch Administration Guide 155
15
• Interface—The neighboring IPv6 interface to be added.
• IPv6 Address—Enter the IPv6 network address assigned to the interface.
The address must be a valid IPv6 address.
• MAC Address—Enter the MAC address mapped to the specified IPv6
address.
STEP 5 Click Apply. The switch is updated.
Modifying an IPv6 Neighbor
To modify an IPv6 Neighbor:
STEP 1 Click Administration > Management Interface > IPv6 Neighbors
The IPv6 Neighbors Page opens.
STEP 2 Select an interface, and click Edit. The Edit IPv6 Neighbors Page opens.
STEP 3 Enter the values for the following fields:
• IPv6 Address—Select a valid IPv6 address.
• MAC Address—Select the MAC address mapped to the specified IPv6
address.
• Type—Select the type of the neighbor discovery cache information entry.
-
Static —The static neighbor discovery cache entries.
-
Dynamic —The dynamic neighbor discovery cache entries.
STEP 4 Click Apply. The switch is updated.