System information

Configuring Multicast Forwarding

MLD Snooping

Cisco Small Business 200 Series Smart Switch Administration Guide 138

• Query Robustness—Enter the Robustness Variable value to be used if the

switch cannot read this value from messages sent by the elected querier.

• Operational Query Robustness—Displays the robustness variable sent by

the elected querier.

• Query Interval—Enter the Query Interval value to be used by the switch if

the switch cannot derive the value from the messages sent by the elected

querier.

• Operational Query Interval—The time interval in seconds between General

Queries received from the elected querier.

• Query Max Response Interval—Enter Query Max Response delay to be

used if the switch cannot read the Max Response Time value from General

Queries sent by the elected querier.

• Operational Query Max Response Interval—Displays the delay used to

calculate the Maximum Response Code inserted into the General Queries.

• Last Member Query Counter—Enter the Last Member Query Count to be

used if the switch cannot derive the value from the messages sent by the

elected querier.

• Operational Last Member Query Counter—Displays the operational value

of the Last Member Query Counter.

• Last Member Query Interval—Enter the Maximum Response Delay to be

used if the switch cannot read Max Response Time value from Group-

Specific queries sent by the elected querier.

• Operational Last Member Query Interval—The Last Member Query

Interval sent by the elected querier.

• Immediate Leave—When enabled, reduces the time it takes to block

unnecessary MLD traffic sent to a switch port.

STEP 5 Click Apply. The switch is updated.