System information

Getting Started
Quick Start Switch Configuration
Cisco Small Business 200 Series Smart Switch Administration Guide 5
1
This section describes the features of the web-based switch configuration utility.
Application Header
The Application Header is displayed on every page. It provides the following
application links:
Upgrade Device Software Upgrade/Backup Firmware/
Language
Backup Device
Configuration
Download/Backup
Configuration/Log Page
Configure QoS QoS Properties Page
Configure Port Mirroring Port and VLAN Mirroring Page
Application Links
Application Link
Name
Description
A red X icon displayed to the left of the Save application
link indicates that Running Configuration changes have
been made that have not yet been saved to the Startup
Configuration file.
Click Save to display the Copy/Save Configuration Page.
Save the Running Configuration file type by copying it to
the Startup Configuration file type on the switch. After this
save, the red X icon and the Save application link are no
longer displayed. When the switch is rebooted, it copies
the Startup Configuration file type to the Running
Configuration, and sets the switch parameters according
to the data in the Running Configuration.
Username Displays the name of the user logged on to the switch. The
default username is cisco. (The default password is cisco.)
Logout Click to logout of the web-based switch configuration
utility.
Links on the Getting Started Page
Category Link Name (on the Page) Linked Page