System information

VLAN Management

Creating VLANs

Cisco Small Business 200 Series Smart Switch Administration Guide 102

Creating VLANs

You can create a VLAN, but this has no effect until the VLAN is attached to at least

one port, either manually or dynamically. Ports must always belong to one or more

VLANs. The Cisco Sx200 Series switch supports 128 VLANs, including the default

VLAN.

Each VLAN must be configured with a unique VID (VLAN ID) with a value from

1 to 4094. The switch reserves VID 4095 as the Discard VLAN. All packets

classified to the Discard VLAN are discarded at ingress, and are never forwarded

to a port.

To c r e a te a V L A N :

STEP 1 Click VLAN Management > Create VLAN. The Create VLAN Page opens.

The Create VLAN page displays the following fields for all VLANs:

• VLAN ID—User-defined VLAN ID.

• VLAN Name—User-defined VLAN name.

• Type—VLAN type. The possible options are:

- Static—VLAN is user-defined.

- Default—VLAN is the default VLAN.

STEP 2 Click Add to add a new VLAN or select an existing VLAN and click Edit to modify

the VLAN parameters. The Add/Edit VLAN Page opens.

The page enables the creation of either a single VLAN or a range of VLANs.

STEP 3 To create a single VLAN, select the VLAN radio button, enter the VLAN ID (VID),

and optionally the VLAN Name.

To create a range of VLANs, select the Range radio button, and specify the range

of VLANs to be created by entering the Starting VID and Ending VID, inclusive.

STEP 4 Click Apply to create the VLAN(s).