User guide

A-15
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Appendix A MML User Interface and Command Reference
prov-ed
Related Commands
prov-ed
The prov-ed command modifies a provisioned component.
prov-ed:name=MML name,param name=param value,...
Note Enter only those parameters that must be modified.
Syntax Description
Usage Guidelines To change more than one parameter, enter additional param name=value descriptions on the command
line. See Chapter 3, “Provisioning the Cisco HSI,” for a list of MML names, parameter names, and their
associated values.
Examples Use the MML command shown in the following example to edit a provisioning element with the MML
name ras, parameter name maxFail, and value 7:
gw mml> prov-ed:name=ras,maxfail=7
H323 Signaling Interface Sun Jan 7 15:22:02 2001
M SUCC
Successfully edited provisioning element(s):
Command Description
prov-add Adds a component.
prov-cpy Activates the configuration settings in the current provisioning
session.
prov-ed Modifies a provisioned component.
prov-exp Exports the current configuration of the Cisco HSI in MML
command form to a file or files.
prov-rtrv Retrieves information about an existing provisioning session.
prov-sta Establishes a provisioning session.
prov-stp Terminates either a specified provisioning session or the current
provisioning session.
MML name MML name for the element you are modifying. Valid MML names are:
• sys_config_static
• sys_config_dynamic
• h323_sys
• ras
• h245
• q931
param name The name of a valid configuration parameter for the specified name.
param value The value you want to assign to the parameter.