User guide

A-13

Cisco H.323 Signaling Interface User Guide

OL-2156-04 Rev. A1

Appendix A MML User Interface and Command Reference

prov-cpy

Related Commands

prov-cpy

The prov-cpy command copies configuration settings from the current provisioning session to the

Cisco HSI to activate the configuration. If this command is successful, it terminates the current

provisioning session. If this command fails, there is no active provisioning session. If any client level

parsing fails during the data session, a confirm is needed for the data to be activated.

prov-cpy[:confirm]

Syntax Description

Examples The command shown in the following example copies the configuration changes from the current session

to the Cisco HSI:

gw mml> prov-cpy

H323 Signaling Interface Sun Jan 7 13:53:42 2001

M SUCC

Successfully activated the provisioning session.

Usage Guidelines See Chapter 3, “Provisioning the Cisco HSI,” for a list of MML names, parameter names, and their

associated values.

Related Commands

Command Description

prov-cpy Activates the configuration settings in the current provisioning

session.

prov-dlt Deletes a provisioned component.

prov-ed Modifies a provisioned component.

prov-exp Exports the current configuration of the Cisco HSI in MML

command form to a file or files.

prov-rtrv Retrieves information about an existing provisioning session.

prov-sta Establishes a provisioning session.

prov-stp Terminates either a specified provisioning session or the current

provisioning session.

confirm If any client level parsing fails during the data session, a confirm is needed