User guide

A-9
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Appendix A MML User Interface and Command Reference
clr-meas
GW Signaling Interface 2000-12-05 14:19:22
M SUCC
mml>
Related Commands
clr-meas
The clr-meas command resets a measurement counter.
clr-meas:counter group:name=measurement name
clr-meas:counter group
Syntax Description
Examples In this example, a measurement counter, GK_DISC_ATT_TOT (Gatekeeper Discovery Attempts), is
reset in the counter group RAS:
gw mml> clr-meas:RAS
GW Signaling Interface 2000-12-05 14:19:22
M SUCC
mml>
mml> clr-meas:RAS:name=GK_DISC_ATT_TOT
GW Signaling Interface 2000-12-05 14:19:22
M SUCC
Related Commands
Command Description
ack-alm Acknowledges that an alarm event is recognized but does not clear the
alarm.
rtrv-alms Displays all active alarms
counter group Valid counter groups are:
• RAS
• Q931
• H245
measurement name For a list of measurement names, see Table 4-1, Table 4-2, and Table 4-3.
Command Description
rtrv-ctr Displays the measurements for a counter group.