User guide

A-6

Cisco H.323 Signaling Interface User Guide

OL-2156-04 Rev. A1

Appendix A MML User Interface and Command Reference

MML Help

MML has an online help feature. The MML help command displays a list of valid system commands

and an explanation of each command’s use. To display the online help, start an MML session and type

help at the command line prompt. See the “help” section on page A-11.

Quitting an MML Session

To quit an MML session, type quit at the prompt.

MML Command Reference

This section describes the following MML commands:

• ack-alm

• clr-alm

• clr-meas

• diaglog

• h

• help

• prov-add

• prov-cpy

• prov-dlt

• prov-ed

• prov-exp

• prov-rtrv

• prov-sta

• prov-stp

SABT Status abort The requested operation did not complete within

the allotted time.

SNVS Component not in valid state The requested operation failed because the

component is either not configured to accept the

operation or the component is already in the

desired state.

SNSP State not supported The operation is not supported by the component.

SROF Status requested operation

failed

The requested operation failed.

Table A-4 MML Error Messages and Descriptions (continued)

Error Message Definition Description