User guide

A-5
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Appendix A MML User Interface and Command Reference
MML Responses
Successfully edited provisioning element(s):
MML Name : logging.
Parameter: EISUP.
Value : 0x0000.
gw mml> prov-cpy
H323 Signalling Gateway Tue Jan 22 05:57:13 2002
M SUCC
Successfully activated provisioning session nolog.
gw mml>
MML Responses
The following sections describe the two types of response messages that are displayed by the MML user
interface:
• Status messages
• Error messages
Status Messages
Table A-3 lists the MML status messages and their descriptions.
Error Messages
If an MML command does not perform, an error message is displayed. Table A-4 lists the MML error
messages and their descriptions.
.
Table A-3 MML Status Messages and Descriptions
Status Message Description
RTRV Retrieve Retrieve and display the contents of the specified file
SUCC Successful Successful completion
Table A-4 MML Error Messages and Descriptions
Error Message Definition Description
DENY Command denied The system recognizes the command but does not
perform the requested function.
ICNV Input command not valid The system does not recognize the MML
command.
IDNV Input data not valid An unknown parameter was entered.
IISP Input syntax error Incorrect syntax was entered.
IITA Invalid target The system cannot perform the requested
operation on the specified component, or the
component does not exist.
IPRM Input parameter missing An expected parameter was not entered.