User guide

A-1

Cisco H.323 Signaling Interface User Guide

OL-2156-04 Rev. A1

APPENDIX

MML User Interface and Command Reference

Introduction

This chapter provides information about Man-Machine Language (MML) command syntax and

conventions, batch files, and procedures for starting and stopping MML sessions in the Cisco H.323

Signaling Interface (HSI) application. The chapter contains the following sections:

• Starting an MML Command Session in the Cisco HSI, page A-1

• MML Commands, page A-2

• Starting an MML Session, page A-3

• Batch Files, page A-3

• MML Responses, page A-5

• MML Help, page A-6

• Quitting an MML Session, page A-6

Starting an MML Command Session in the Cisco HSI

To start an MML command session within the HSI environment, complete the following steps:

Step 1 Log in to Cisco HSI as mgcusr.

Step 2 Become superuser by typing su <root password>.

Step 3 To start the software, enter the following command:

/etc/init.d/CiscoGW start

Step 4 Exit out of superuser.

Step 5 Type mml to start the MML command-line interpreter.

Tip Press the Ta b key twice to see a list of MML commands.