User guide

4-12
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Chapter 4 Managing the Cisco HSI
Gapping
Retrieving Call Gapping Data
To retrieve the current levels of call gapping for all gapping clients, enter the rtrv-gapping command.
The command displays text similar to the following:
The output shows the gapping levels set by the overload function and the MML command set-gapping.
The highest gapping level is used as the level to gap calls, which is indicated as Yes in the column titled
Active. In this example, the MML levels for outgoing and incoming calls are active.
Client Name Direction Level Call Type Active
Overload Outgoing 10 Normal No
Overload Incoming 10 Normal No
MML Outgoing 20 All Yes
MML Incoming 30 All Yes