User guide

4-2
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Chapter 4 Managing the Cisco HSI
Starting Call Processing
Starting Call Processing
To start call processing, use the sta-callproc MML command. For more information about this
command, see Appendix A, “MML User Interface and Command Reference.”
Stopping the Call Processing Application
To stop the call processing application, use the stp-softw MML command. For more information about
this command, see Appendix A, “MML User Interface and Command Reference.”
Starting the Call Processing Application
To start the call processing application, use the sta-softw MML command. For more information about
this command, see Appendix A, “MML User Interface and Command Reference.”
Reporting the Cisco HSI Status
To display the status of the Cisco HSI, use the rtrv-softw MML command. For more information about
this command, see Appendix A, “MML User Interface and Command Reference.”
Measurements
The following sections describe two measurement categories:
• System-related measurements
• Call-related measurements
System-Related Measurements
The CIagent is a Simple Network Management Protocol (SNMP) subagent. It handles the collection and
storage of the following system performance measurements:
• CPU occupancy
• RAM occupancy
• Disk occupancy
• TCP usage
Use the CIAGENTSCANPERIOD parameter to define the period that the CIagent polls the CPU for
utilization (see Chapter 3, “Provisioning the Cisco HSI”).