User guide

3-14
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Chapter 3 Provisioning the Cisco HSI
H.323 Stack Configuration
Table 3-10, Table 3-11, and Table 3-12 list the parameters and modes related to the configuring of
codecs. The array index [i] must be replaced with a valid braced index from 1 to 20. The braced index
must be continuous and unique (that is, there must be no duplicates).
channelsTimeout The time (in seconds) the stack
waits for a response to a channel
establishment message.
INTEGER(0, 65535) 10 Immediate
roundTripTimeout The time (in seconds) the stack
waits for round-trip procedure
completion.
INTEGER(0, 65535) 5 Immediate
requestCloseTimeout The time (in seconds) the stack
waits for request close procedure
completion.
INTEGER(0, 65535) 5 Immediate
requestModeTimeout The time (in seconds) the stack
waits for request mode procedure
completion.
INTEGER(0, 65535) 5 Immediate
caps.timeout The maximum time (in seconds)
the stack waits before it gives up on
the capability exchange procedure.
INTEGER(0, 65535) 5 Immediate
caps.maxAudioDelay Maximum H.255 multiplex audio
delay jitter.
INTEGER(0, 1023) 60 Immediate
mediaLoopTimeout The timeout (in seconds) of the
media loop procedure.
INTEGER(0, 65535) 5 Immediate
Table 3-9 H.245 Parameters (continued)
Parameter Name Description Type Example
Update
Type
Table 3-10 H.245 Terminal Capability Codec Parameters
Parameter Name Type
caps.table[i].entryNo INTEGER(1, 65535)
caps.table[i].audio.g711Alaw64k INTEGER(1, 256)
caps.table[i].audio.g711Alaw56k INTEGER(1, 256)
caps.table[i].audio.g711Ulaw64k INTEGER(1, 256)
caps.table[i].audio.g711Ulaw56k INTEGER(1, 256)
caps.table[i].audio.g722at64k INTEGER(1, 256)
caps.table[i].audio.g722at56k INTEGER(1, 256)
caps.table[i].audio.g722at48k INTEGER(1, 256)
caps.table[i].audio.g7231.maxAudioFrames INTEGER(1, 256)
caps.table[i].audio.g7231.silenceSuppression INTEGER(0, 1)
caps.table[i].audio.g728 INTEGER(1, 256)
caps.table[i].audio.g729 INTEGER(1, 256)