User guide

3-12
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Chapter 3 Provisioning the Cisco HSI
H.323 Stack Configuration
rasPort* The number of the port
receiving all RAS
transactions for the current
endpoint. Set this parameter
to 0 to allow the software to
look for the available port.
INTEGER(0, 65535) 0 Start
compare15bitRasCrv If this parameter is present, it
causes the stack to ignore the
call reference value (CRV)
MSBit in RAS messages.
NULL — Immediate
maxRetries* Maximum number of RAS
retransmissions.
INTEGER(1, 200) 3 Immediate
maxMulticastTTL Maximum number of
multicast time to live (TTL).
INTEGER(0, 200) 3 Start
preGrantedArqUse Choice of direct or routed. If
direct, the pregranted
Admission Request (ARQ)
feature is used for both direct
and routed calls. If routed,
the pregranted ARQ feature
is used only for routed calls.
If absent, the pregranted
ARQ is not used.
STRING direct Next Call
manualDiscovery.ipAddress The IP address of a known
gatekeeper with which an
endpoint might attempt to
register.
STRING 10.70.54.53 Start
manualDiscovery.port The port associated with the
manualDiscovery.ipAddress,
which can, by agreement, be
either a well-known port or
another port.
INTEGER(0, 65535) 1719 Start
gateway.prefix[i] The gateway registers the
telephone prefix specified by
this parameter to indicate
that it is able to terminate it.
STRING 0208 Immediate
gatekeeperId Identifies the gatekeeper
with which the endpoint is
trying to register.
STRING OuterLondon Immediate
terminalAlias[i].e164 Two variants of the same
address for the endpoint;
e164 is numeric and h323ID
is text.
STRING 0208001000 Immediate
terminalAlias[i].h323ID STRING [e-mail] Immediate
Table 3-8 RAS Parameters (continued)
Parameter Name Description Type Example Update Type