User guide
2-7
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Chapter 2 Installing and Configuring Cisco HSI Software
Installing the Cisco HSI
The following text displays:
Enter VSC1 Port
Step 16 Type the VSC1 port number (see Table 2-2) and press Enter.
Note The VSCI port is typically 8003, but it must match the port setting of the IPLNK object in the
PGW 2200 configuration.
The following text displays:
Enter Installation NodeId
Step 17 Type the installation node ID (see Table 2-2) and press Enter.
Note The installation node ID is a text field typically used by network designers for identification
purposes. Entering a value in this field does not affect functionality.
The following text displays:
Enter Hardware Platform
Step 18 Type the hardware platform name (see Table 2-2) and press Enter (typically, accept the default platform
name). The following text displays:
Enter Installation Location
Step 19 Type the installation location (see Table 2-2) and press Enter.
Note The installation location field is a text field typically used by network designers for
identification purposes. Entering a value in this field does not affect functionality.
The following is an example of the screen that displays:
## Executing checkinstall script.
Modified Environment is:
-------------------------
BASEDIR=/opt/GoldWing/2.21
GWHOME=/opt/GoldWing
GWUSR=mgcusr
GWGRP=mgcgrp
GWCONF_IP=”10.70.54.53”
GWCONF_PORT=”1719”
GWCONF_PREFIX=”0208”
GWCONF_ALIAS=”cisco@OuterLondonDomain.com”
GWCONF_GKID=”OuterLondon”
GWCONF_HOST_PORT=8003
GWCONF_VSC1_NAME=goliath
GWCONF_VSC1_PORT=8003
GWCONF_NODEID=”H323-GW1”
GWCONF_HARDWARE=”Sun Netra T1”
GWCONF_LOCATION=”H323 - GW1”
-------------------------
The selected base directory </opt/GoldWing/2.21> must exist before installation is
attempted.
Do you want this directory created now [y,n,?,q]
Step 20 Type y to create the version directory. The following text displays: