User guide

A-38
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Appendix A MML User Interface and Command Reference
stp-softw
Stopped accepting new calls. Existing calls will be released in 5 seconds.
Stopping Call Processing.
stp-softw
The stp-softw command stops the call processing application. This command causes the Cisco HSI to
terminate.
stp-softw[:confirm]
Syntax Description
Examples In the following example, the command stops the call processing application:
gw mml> stp-softw
H323 Signaling Interface Thu Dec 14 16:27:36 2000
M SUCC
There are no active calls.
Application is now stopping
stp-trc
The stp-trc command halts the currently active tracing and closes the trace file.
stp-trc
Syntax Description This command has no arguments or keywords
Examples In the following example, the command halts the currently active tracing and closes the trace file:
gw mml> stp-trc
H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
M SUCC
Tracing deactivated.
Related Commands
confirm If there are active calls, a notification is sent to the craft. In order for the
command to take effect, it must be reentered with the confirm parameter.
Command Description
sta-trc Starts the call processing tracing function.