User guide

A-30
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Appendix A MML User Interface and Command Reference
rtrv-softw
Examples In the following example, the command displays overload status information:
gw mml> rtrv-overload
H323 Signaling Interface Tue Jan 30 11:21:45 2001
M SUCC
Overload/Gapping Information
NumCalls : 0 | CPU : 7% | DiskUsage : 27%
Status : Not in Ovld
Overload Configuration
DiskUsageLimit : 29%
OvldSampleRate : 3000ms
OvldLevel1Percent : 65%
OvldLevel1Filter : NORMAL
OvldLevel1ThreshLowerCpu : 30%
OvldLevel1ThreshUpperCpu : 35%
OvldLevel1ThreshLowerCalls : 800
OvldLevel1ThreshUpperCalls : 1000
OvldLevel2Percent : 75%
OvldLevel2Filter : ALL
OvldLevel2ThreshLowerCpu : 45%
OvldLevel2ThreshUpperCpu : 50%
OvldLevel2ThreshLowerCalls : 1100
OvldLevel2ThreshUpperCalls : 1400
OvldLevel3Percent : 90%
OvldLevel3Filter : NORMAL
OvldLevel3ThreshLowerCpu : 55%
OvldLevel3ThreshUpperCpu : 65%
OvldLevel3ThreshLowerCalls : 1400
OvldLevel3ThreshUpperCalls : 1600
Related Commands
rtrv-softw
The rtrv-softw command displays the status of the Cisco HSI and call processing activity. The following
software states can be displayed for the Cisco HSI:
• Not running
• Starting
• Active
• Restart pending
• Halt pending
• Reboot pending
The following software states can be displayed for call processing:
• Running
• Idle pending
• Idle
rtrv-softw
Command Description
set-overload Defines the overload handling criteria and behavior.