User guide

A-27
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Appendix A MML User Interface and Command Reference
rtrv-log
Examples The following MML command retrieves the current levels of call gapping for all gapping clients:
gw mml> rtrv-gapping
Related Commands
rtrv-log
The rtrv-log command displays the logging level of a package or all packages.
rtrv-log:package=x
rtrv-log:all
Syntax Description
Examples In the following example, the command displays the logging levels of all packages:
gw mml> rtrv-log:all
H323 Signaling Interface Thu Dec 14 16:28:44 2000
M RTRV
Logging levels:
Application........0x0000
CallControl........0xFFFF
Connection.........0x0000
DataManager........0x0000
Eisup..............0xFFFF
FaultManager.......0x0000
Gapping............0x0000
H323...............0xFFFF
Infrastructure.....0x0000
OverLoad...........0x0000
ProcessManager.....0x0000
Provisioning.......0x0000
Signal.............0x0000
Snmp...............0x0000
SnmpSubagent.......0x0000
Client Name Direction Level Call Type Active
Overload Outgoing 10 Normal No
Overload Incoming 10 Normal No
MML Outgoing 20 All Yes
MML Incoming 30 All Yes
Command Description
set-gapping Sets the type of calls to be gapped.
package=x Displays the logging level for the various packages that make up the
Cisco HSI.
For package names, see the “Log Message Packages” section on page 4-10.
all Displays the logging levels of all packages.