User guide

A-26
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Appendix A MML User Interface and Command Reference
rtrv-gapping
rtrv-dest:point code
rtrv-dest:sig path
rtrv-dest:all
Syntax Description
Examples The MML command in the following example retrieves the destination of point code dpcl:
gw mml> retrv-dest:dpc1
MGC-01 Media Gateway Controller 2000-01-12 15:19:51
M RTRV
“dpc1:PKG=SS7-ANSI,ASSOC=UNK,PST=IS
Related Commands
rtrv-gapping
The rtrv-gapping command retrieves information about overload-triggered call gapping.
The following information displays:
• The active/inactive status of call gapping
• The percentage of calls that are gapped
• The type of calls to which gapping is applied
rtrv-gapping
Syntax Description
point code The MML component name of a point code component.
sig path The MML name of the logical signaling channel for which you want to
display information. This path should be made up of sig path DSS IP or sig
path NAS entities. Use the help:prov-add command to obtain a description
of sig path components.
all Displays information about all external point codes and signal paths.
Command Description
set-dest-state Changes the service state of an IP link or E-ISUP signaling path to in
service (IS) or out of service (OOS).
This command has no arguments or keywords