User guide

A-25
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Appendix A MML User Interface and Command Reference
rtrv-ctr
rtrv-calls[:time elapsed]
Syntax Description
Examples In the following example, the command displays all actively connected calls:
gw mml> rtrv-calls
H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
M SUCC
CallId SrcAddr DestAddr StartTime
124 04161234567 0299598125 2000-11-27 11:25:13.259
rtrv-ctr
The rtrv-ctr command displays the measurements for a counter group.
rtrv-ctr:counter group
Syntax Description
Examples In the following example, the command displays the measurements for the RAS counter group:
gw mml> rtrv-ctr:RAS
GW Signaling Interface 2000-12-05 14:19:22
M RTRV
“H323-GW1:GROUP=\"RAS\",NAME=\"GK DISC ATT TOT\",VAL=10"
“H323-GW1:GROUP=\"RAS\",NAME=\"GK REG ATT TOT\",VAL=0"
“H323-GW1:GROUP=\"RAS\",NAME=\"GK REG SUCC TOT\",VAL=12"
“H323-GW1:GROUP=\"RAS\",NAME=\"GK RCV UNR ATT TOT\",VAL=100"
“H323-GW1:GROUP=\"RAS\",NAME=\"GK XMIT UNR SUCC TOT \",VAL=2000"
“H323-GW1:GROUP=\"RAS\",NAME=\"GK XMIT UNR ATT TOT\",VAL=20"
“H323-GW1:GROUP=\"RAS\",NAME=\"GK RCV UNR SUCC TOT\",VAL=10"
“H323-GW1:GROUP=\"RAS\",NAME=\""GK RLS ATT TOT\",VAL=20"
“H323-GW1:GROUP=\"RAS\",NAME=\"GK RLS SUCC TOT\",VAL=30"
“H323-GW1:GROUP=\"RAS\",NAME=\"GK INFO REPORT TOT\",VAL=40"
Related Commands
rtrv-dest
The rtrv-dest command retrieves status information about the IP links and E-ISUP signaling path to the
PGW 2200.
time elapsed If the time elapsed parameter is provided (in units of minutes), calls display
only if they have exceeded the specified time.
counter group The name of an MML counter group (RAS, Q931, or H245).
Command Description
clr-meas Resets a measurement counter.