User guide

A-21
Cisco H.323 Signaling Interface User Guide
OL-2156-04 Rev. A1
Appendix A MML User Interface and Command Reference
quit
The MML command in the following example terminates the uk9 provisioning session:
gw mml> prov-stp:uk9:confirm
H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
M SUCC
Successfully stopped provisioning session "uk9"
gw mml>
If the previous session starts from an MML process assigned the name mml2, you can use the following
MML command:
gw mml> prov-stp:mml2:confirm
H323 Signaling Interface Day Mon 1 hh:mm:ss YYYY
M SUCC
Successfully stopped provisioning session "uk9"
gw mml>
Related Commands
quit
The quit command ends an MML session.
quit
Syntax Description
Examples The command in the following example ends an MML session.
gw mml> quit
Command Description
prov-add Adds a component.
prov-cpy Activates the configuration settings in the current provisioning
session.
prov-dlt Deletes a provisioned component.
prov-ed Modifies a provisioned component.
prov-exp Exports the current configuration of the Cisco HSI in MML
command form to a file or files.
prov-rtrv Retrieves information about an existing provisioning session.
prov-sta Establishes a provisioning session.
This command has no arguments or keywords.