Operating instructions

optiClient5d_Einleitung.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
1-3
Nur für den internen Gebrauch
General Information
About these Operating Instructions
1.2 About these Operating Instructions
Target group
These operating instructions help you familiarize yourself with optiClient 130 and its functions.
The instructions contain important information on how to operate optiClient 130 securely and
correctly. Follow these instructions carefully to avoid incorrect operation and to use optiClient
130 to its full potential.
This operating instructions should be read and followed by every person involved in installing,
operating or configuring optiClient 130.
Operating instructions layout and use
The section General Information provides an introduction to optiClient 130 and its underlying
concept.
Information on software installation and recommended settings under Windows can be found
in the Installing optiClient 130 section.
The section First Steps, Display Modes and General Operation contains information that will
assist you when starting out with optiClient 130. It introduces and describes how to handle the
various optiClient 130 operating elements. You should read this section carefully if you are not
already familiar with optiClient 130.
The section Configuration and Settings provides support for setting the various parameters re-
quired for optiClient 130 operation. Read this section if you would like to customize the display
for "your" optiClient 130.
Information on using directories can be found in the section The optiClient 130 Directories.
The section The optiClient 130 Call Lists describes the call lists available and explains how to
use them.
In the section The optiClient 130 Contact List, you will find some notes on operating and using
the optiClient 130 contact list.
– ScreenSaver Manager
(for managing screen-saver functions)
xx x
Module Module is activated during installa-
tion for provider
CTI HiPath SIP (Stimulus
operating mode)