Operating instructions
optiClient5d_Konfiguration.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
4-25
Nur für den internen Gebrauch
Configuration and Settings
Settings for User Interface Modules
Base DN for an LDAP directory
In the case of LDAP server configuration, you can set a specific base in the Base DN field as
the starting point when searching for/displaying optiClient 130 entries in this LDAP directory.
Two alternative formats are available for making the entry:
–
<Level name 3>
=
<Name>, <Level name 2>
=
<Name <Level name 1>
=
<Name>
or
–
<Level name 1>
=
<Name>
/
<Level name 2>=<Name>
/
<Level name 3>
=
<Name>
Example of an LDAP directory with the following elements:
– Name Level 1: c (e.g., for "country“)
Name of an entry on this level: DE
– Name Level 2: o (e.g., for „organization“)
Name of an entry on this level: SIEMENS
– Name Level 3: ou (e.g., for „organization unit“)
Name of an entry on this level: ICN
Enter the following in the Base DN field to set this base as the search basis:
ou=ICN, o=Siemens, c=DE
or alternatively
c=DE/o=Siemens/ou=ICN
If no restrictive Base DN is defined, the complete LDAP directory is the Base DN.
4.3.6 Settings for the easyCom Communication Circle
The easyCom communication circle provides an additional module which allows you to use the
telephony functions. It is based on an intuitive graphic communication circle, where you can
choose various options. Under User interface modules - easyCom you can change the set-
tings for
● Symbols
● Image
>
General information on navigating within the Settings dialog can be found under
Navigating the Dialog Settings.