Operating instructions

Configuration and Settings Nur für den internen Gebrauch
A31003-G2550-A100-6-76A9, 04/2005
4-20 optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
optiClient5d_Konfiguration.fm
Settings for User Interface Modules
4.3.4 Call List Settings
To edit call list settings, select User interface modules - Call lists. You can define settings for
the following:
● Call Types
4.3.4.1 Call Types
All call lists for incoming or outgoing connections or connection requests supplied by the com-
munication system connected can be viewed in the Call List Administration in optiClient 130.
The Call List Administration can always be activated via the Module menu in optiClient 130 and
any call lists available here can be selected.
You can program buttons in the optiClient 130 main bar for fast access to the Call List Admin-
istration for specific call lists. Apart from the call list icon, these buttons also show the number
of calls in the relevant list. To configure the buttons, select User interface modules - Call lists
- Call types:
Display of options
Depending on general availability of call lists on the part of the communication system, the fol-
lowing types of call lists can be selected:
● Incoming/outgoing - connected
● Outgoing - connected
● Outgoing - not reached
● Incoming - connected
● Incoming - not reached
>
Options for editing settings for call lists are only available in the case of activation
during live operation, not in the case of activation when logging on. The scope of pa-
rameters available depends on the connected communication system.
>
You do not have to activate all options to access all call list types. You can switch be-
tween the individual call list types in the Call List Administration.