Operating instructions

optiClient5d_Konfiguration.fm
A31003-G2550-A100-6-76A9, 04/2005
optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
4-19
Nur für den internen Gebrauch
Configuration and Settings
Settings for User Interface Modules
4.3.2 Settings for the Phone
The phone module controls the integrated and free phone in optiClient 130. Select User inter-
face modules - Phone. You can define settings for the following:
● Integrated Phone
4.3.2.1 Integrated Phone
While the integrated phone’s display is part of the main bar, the associated function, dialing,
and dialog keys are not normally visible (depending on the individual setting). Under User in-
terface modules - Phone - Integrated phone you can define which action should be per-
formed when you click the display on the main bar.
Display
> The selected option lets you control display behavior by clicking the integrated phone’s
display. The following options are available:
– Display integrated phone as popup window
If you click the display, the function, dialing, and dialog keys appear on the display as
a popup window (as individually set). The keys can then be operated as usual in the
window. The popup window containing the keys disappears as soon as you click an-
other window.
– Display free phone
If you click the integrated phone’s display, the free phone opens (as individually set). If
the free phone is already open, you switch to this window.
– Show and hide free phone
If you click the integrated phone’s display, the free phone opens (as individually set). If
the free phone is already open, it is now closed.
4.3.3 Settings for the Device State
The Device state module is responsible for the Telephony and Forwarding menu in the optiCli-
ent 130 main bar. If the module is present, no additional settings are needed, so no parameters
are offered for editing.