Operating instructions

Configuration and Settings Nur für den internen Gebrauch
A31003-G2550-A100-6-76A9, 04/2005
4-16 optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
optiClient5d_Konfiguration.fm
Settings for User Interface Modules
4.3 Settings for User Interface Modules
You can edit the following options for user interface modules:
● Settings for Audio Control
● Call List Settings
● Settings for Directories/Address Books
● Settings for the Phone
● Settings for the easyCom Communication Circle
● Settings for Contact list and Contact directory
● Settings for the Webbrowser
4.3.1 Settings for Audio Control
Audio devices such as the Siemens optiPoint handset (and possibly headset) are provided for
conducting calls. Define the various basic settings to operate the available audio devices cor-
rectly. To edit these settings, select User interface modules - Audio Manager. You can edit
settings for the following:
● Audio Schemes
4.3.1.1 Audio Schemes
The hardware settings, for example, for voice outputs or ringers are grouped together in audio
schemes. You can add, change or delete different audio schemes. You can therefore easily pro-
gram different audio options (for example, at different locations) and then select the appropriate
scheme for operation. To edit/select audio schemes, select User interface modules - Audio
Manager - Audio Schemes:
>
The options described here for user interface modules apply to the standard instal-
lation of optiClient 130.
>
Options for editing the general settings for Audio Manager are only available in the
case of activation when logging on as these settings must have been loaded during
user logon and changes are not possible during live operation without restarting op-
tiClient 130 (see also Logging In).