Operating instructions

Configuration and Settings Nur für den internen Gebrauch
A31003-G2550-A100-6-76A9, 04/2005
4-14 optiClient 130 V5.0 , Administrator Documentation and Operating Instructions
optiClient5d_Konfiguration.fm
Settings for the Main Program
4.2.6 Settings for Program Updating
You can make various settings under Main program - Program update to configure automat-
ed searches for optiClient 130 program updates:
Display of options
> No verification
Program updates are not verified.
> Verification on program start
When the optiClient 130 program starts, the memory location specified under Directory is
searched for an updated version of the optiClient 130 program.
> Permanent verification
When operating optiClient 130, the memory location specified under Directory is searched
at the fixed intervals set under Interval (minutes) for an updated version of the optiClient
130 program.
>Directory
Memory location where the program update is expected to be found. Enter the folder in the
input field or click ... and select it in the ensuing dialog.
Updating the Program describes how to proceed when a program update is found.
>
Options for editing settings for program updating are only available in the case of ac-
tivation when logging on, not in the case of activation during live operation.
>
General information on navigating within the Settings dialog can be found under
Navigating the Dialog Settings.